Product Type: Wireless Radio Control External Flash
Model: HVL-F60RM2
Shoe Type: Sony Multi Interface Shoe
Flash Output
- Maximum Guide Number: GN60
- Rated at 200mm, ISO 100
- High-output flash designed for professional and advanced photography
- Flash Coverage: 20–200mm
- Built-in wide panel extends coverage to 14mm
Flash Modes
- TTL
- Manual
- Multi Flash
- Supports Sony P-TTL flash control
- Per-frame P-TTL flash control is available during compatible continuous shooting modes with supported cameras.
Continuous Flash Performance
- Up to 200 consecutive flashes
- Up to 10 flashes per second
- Sony specifies this performance at 1/32 flash output with Ni-MH batteries under its test conditions.
Recycle Time & Flash Capacity
- Using 4 × Ni-MH batteries:
- Approx. 1.7 sec recycle time
- Up to 240 flashes
High-Speed Sync
- High-Speed Sync (HSS): Yes
- With compatible α9 III, flash synchronisation is possible at shutter speeds up to 1/80,000 sec under specified conditions.
Quick Shift Bounce
- Sony Quick Shift Bounce
- Upward tilt up to 150°
- Downward tilt: 8°
- Designed for rapid switching between horizontal and vertical shooting
- Helps maintain flexible bounce positioning when camera orientation changes.
Radio Wireless Control
- 2.4GHz radio wireless communication
- Works as Wireless Commander or Receiver
- 14 channels
- Controls up to 15 flash units
- Up to 5 groups in GROUP mode
- Up to 3 groups in TTL / Manual modes.
Intelligent Camera Communication
With compatible Sony α cameras, the HVL-F60RM2 supports advanced communication between the camera and flash, including:
- Flash parameters controllable from compatible camera menus
- Flash control linked to camera Face Detection
- Automatic white balance correction based on flash colour-temperature information
- Reduced flash release time lag with compatible cameras.
-
External Battery Support
- Compatible with optional Sony FA-EBA1 External Battery Adaptor
- Particularly useful for high-volume professional shooting
- With the α1 + FA-EBA1, Sony states the HVL-F60RM2 can achieve approximately 20 flashes/sec for more than 10 seconds under its specified conditions.
Power
- 4 × AA alkaline batteries, or
- 4 × AA Ni-MH rechargeable batteries.
Professional Durability
- Dust- and moisture-resistant design
- Metal Multi Interface Shoe foot
- Rugged side frame
- Sealed shoe design for improved reliability
- Optimised flash algorithm for improved resistance to overheating.
Dimensions
- Approx. 78.1 × 143.1 × 104.6mm (W × H × D)
Weight
- Approx. 439g / 15.5oz
- Excluding batteries.